LINE MATCHING TRANSFORMER (XLRM - TS)
Shure Incorporated
  This reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone cables with either low- or high-impedance microphones. However, when connecting a high-impedance microphone, limit the cable length between the microphone and the transformer to 4.6 m (15 foot). The cable from the transformer to the low-impedance input can be any desired length. The transformer prevents high-frequency loss, level loss, and pickup of noise and hum. The A95U comes furnished with a three-pin XLR connector on the low-impedance end, with a 1/4 inch phone plug and phone jack adapter on the high-impedance end. This item is currently low on stock. Please let us know if you would like to order this item. | Stock Code
A95U
Pack/Qty
EA
Retail Price (Incl GST)
$ 95.00
Warranty
2
  |
 » Switchable Attenuator - (A15AS) Use the A15AS balanced-line attenuator to prevent low-impedance microphones (rated at 150 or 600 ohms) and high-output condenser microphones from overloading » more » High Pass Filter - (A15HP) The Shure A15HP filter rolls off low audio frequencies to reduce 60 Hz electrical hum, low-frequency wind noise, air conditioner noise, » more » Tone Generator - (A15TG) The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source that can be used to troubleshoot low-impedance, balanced-line microphone » more » Line Matching Transformer - (A85F) The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced » more » Line Matching Transformer (xlrf - Ts) - (A95UF) The Shure A95UF is a reversible transformer that matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The » more » Camcorder Interface 0.6m (3.5mm - Xlrf) - (A96F) The Shure A96F transformer connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording » more | |
