PLASMA FRIENDLY IR RECEIVER (92222)
SONANCE
| Designed for use with plasma and LCD televisions and other IR or fluorescent interference sources. Features system talk-back LED. 12 units may be powered by one PS1 power supply. Also features a 7 ft, three-conductor ribbon cable with stripped and tinned ends. Use with these OptiLinQ emitters (E1, E2, VE1, VE2) - Operational frequency range: 30kHz - 110kHz - Reception Range: 10-25 feet - Cable requirements: 3-conductor, 24 to 18 gauge (unshielded OK) - Maximum transmission length: 1000 ft using 18 gauge wire - Maximum current output: 100 mA - Power requirements: 12V DC at 110 mA - Dimensions (WxHxD): 7/16 inch x 5/16 inch x 2-1/8 inch (11.2mm x 8.5mm x 55mm) This product is sold through specialist dealers only, please phone 09 913 6212 or email info@nowsound.co.nz. |   |
 » Optilinq E1 Ir Emitter (91348) - (E1-EMITTER) Mini IR emitter - easily placed on any equipment, contains window shield that allows for close coupling of the emitter to the control window. Plugs » more » Optilinq Visible Ir Emitter (91351) - (VE2-EMITTER) Dual LED version of the VE1. FEATURES: - Visible low-output version of the E2 provides a visible output indicator with a low output level suitable » more | |
 » 1zone Amplified Connecting Block (91354) - (ACB1) For installations requiring multiple IR emitters, this one-zone amplified connecting block provides strong IR signals and accommodates all E1, E2, VE1 » more » One Zone Connecting Block (91353) - (CB1) CB1 one-zone connecting block is ideal for quick IR system installation. It mounts easily and provides jacks for receiver, emitter and » more » Two Zone Connecting Block (91355) - (CB2Z) Two-zone connecting block routes IR from each zone to a dedicated receiver or pre-amp. It is compatible with CB1 and ACB1 » more » Cabinet Mount Ir Receiver (91343) - (CR1) Cabinet mounted infrared receiver with 45-degree off-axis reception capability allows control of IR equipment from hidden locations. Red LED tests system » more » Optilinq E1 Ir Emitter (91348) - (E1-EMITTER) Mini IR emitter - easily placed on any equipment, contains window shield that allows for close coupling of the emitter to » more » Optilinq Ir Emitter (91350) - (E2-EMITTER) Dual LED version of the E1 easily installed and provides constant IR output. Plugs into OptiLinQ connecting blocks. FEATURES: - Dual Mini » more » Plasma Friendly Ir Receiver Silv (92341) - (FSMR1-S) Silver version of picture shown Designed for use with plasma and LCD televisions and other IR or fluorescent interference sources. Features system » more » Optilinq Ir Learner (92071) - (IRLEARNER) The Sonance OptiLinQ IR Learner is an infrared code capture system specifically designed for system integration professionals. Unlike the capture hardware » more » Micro Ir Receiver (91344) - (MR1) This extremely sensitive micro IR receiver is designed to fit under speaker grilles and accepts IR signals from up to 55-degrees » more » 12v Dc 250ma Power Supply Unit (91352) - (PS1) Basic 12v DC power supply plugs directly into OptiLinQ connecting blocks and easily powers OptilinQ IR systems. FEATURES: - Supplies 12V » more » 12v Dc High Current Power Supply (91356) - (PS2) High-current 12v DC 1A power supply is ideal for large IR systems. Connects directly to OptiLinQ connecting blocks FEATURES: - High current » more » Optilinq Ir Receiver (91345) - (SMR1) Surface-mount IR receiver with great sensitivity, 55-degree reception angle, 30 inch reception range. PS1 power supply required FEATURES: - Brass bezel surface mount » more » Optilinq Ir Receiver (91346) - (SMR1P) Quick-connect, surface-mount IR receiver with great sensitivity, 55-degree reception angle, 30 inch reception range. PS1 power supply required. FEATURES: - Quick connect » more » Optilinq Visible Ir Emitter (91349) - (VE1-EMITTER) Visible low-output version of the E1 provides a visible output indicator with a low output level suitable for controlling a single » more » Optilinq Visible Ir Emitter (91351) - (VE2-EMITTER) Dual LED version of the VE1. FEATURES: - Visible low-output version of the E2 provides a visible output indicator with a » more » Optilinq Ir Receiver (91347) - (WMR1) Wall-mount IR receiver fits standard gang retrofit or new construction ring with the IR window bezel allowing for Decora installation. FEATURES: - » more | |
