CARDIOID GOOSENECK MICROPHONE
Shure Incorporated
| Developed for computer voice recognition applications, the 503BG gooseneck microphone offers excellent voice fidelity while reducing background noise. Also use the 503BG microphone in other close-talking applications such as paging and talkback. The 503BG gooseneck microphone features a low-impedance, moving coil type transducer with an integral humbucking coil and an attached two-conductor shielded cable with a built-in strain relief. It produces a frequency response with an essentially constant output voltage over the voice spectrum when used close to the sound source. The 503BGs case is aluminum with a black enamel finish. It mounts to a gooseneck, a fixed pipe or a microphone stand using a standard 5/8 inch-27 thread. FEATURES: - Optimized performance in voice processing and computer voice recognition applications - Smooth frequency response with excellent fidelity in the voice range - Cardioid pickup pattern and close-talking operation keep unwanted signals and background noise at low levels - Constant output over voice spectrum when close talked - Humbucking coil minimizes undesirable hum effects such as CRT interference - Low-impedance design permits long cable runs in extreme hum fields - Small unobtrusive design does not interfere with CRT visibility NOTE: Requires gooseneck This product is sold through specialist dealers only, please phone 09 913 6212 or email info@nowsound.co.nz. |   |
 » In Line On/off Switch - (A120S) The Shure A120S In-Line On/Off Switch is an in-line, balanced, locking or momentary switch for a microphone. The A120S can be configured in several ways » more » 12inch Gooseneck - (G-12) The Shure G12 is a 12 inch (30.48 cm) gooseneck with standard threaded ends. The goosenecks flexible design allows easy microphone positioning. Chromed finish. » more » 18inch Gooseneck - (G-18) The Shure G18 is a 18 inch (46.48 cm) gooseneck with standard threaded ends. The goosenecks flexible design allows easy microphone positioning. » more » Gooseneck Mounting Flange Silver - (A12) The Model A12 is a 5/8"-27 threaded Mounting Flange. Finish is matte silver. 45mm dia » more » 7 In Desktop Stand Round Base Black - (STNDMD) Connect Series. 5" round base, desktop, 7" high, black » more | |
 » Desktop Paging Omni Dynamic - (450II) The Shure Model 450 Series II is a high output dynamic desktop microphone designed for paging and dispatching applications. This extremely » more » Handheld Paging Push-to-talk - (514B) The Shure 514B is a low impedance, dynamic, handheld microphone designed for paging and public address systems It provides clear, natural » more » Desktop Paging W/tele.neck Microphone - (522) The Model 522 is a dynamic base station microphone designed especially for radio communications, paging, and dispatching systems. Its cardioid (unidirectional) » more » Handheld Low-z Paging Micrphone - (527B) The 527B is wired for balanced-line operation and is recommended for use where long cable lengths are required, or areas where » more » Handheld Paging Mic W/transistor-amp - (527C) The Shure 527C is a dynamic hand-held communications microphone designed for use in a variety of mobile and fixed-station applications, including » more » All Purpose Lecturn Microphone - (545SD-LC) The UNlDYNE III Model 545SD is a dual-impedance, unidrectional, dynamic microphone. Shipped connected for low-impedance operation, it features a silent magnetic » more » Gooseneck Mount Paging Microphone - (561) The Shure Model 561 is an omnidirectional, low-impedance dynamic microphone designed for use on a stand or flexible gooseneck. Its smooth » more » Gooseneck Mount Paging/dispatch Mic - (562) The Shure Model 562 is a noise-canceling dynamic microphone designed for voice applications in fixed-station paging and radio communications. It provides » more » Handheld Dynamic Paging Microphone - (577B) The Shure Model 577B Microphone is a handheld dynamic microphone designed for communications and paging applications that require highly intelligible, low » more » G/neck Mount Dual Impendance - (588SDX) The Model 588SDX is a ball-type, dual-impedance, cardioid (unidirectional) dynamic microphone that provides excellent voice reproduction. Its spherical grille is a » more » Handheld Paging Microphone - (596LB) The Shure Model 596LB is a compact, hand-held dynamic, low-impedance communications microphone. Designed especially for voice communications use, it is an » more » Dynamic Omni Lapel Microphone - (SM11) The Shure Model SM11 is a miniature dynamic lavalier microphone designed for use in television broadcasting (on camera), for sound reinforcement, » more | |
