LINE MATCHING TRANSFORMER
Shure Incorporated
| The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced female XLR and unbalanced high impedance male 1/4'' phone plug connectors, and may be used in reverse. The A85F is typically used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder Note: Not for connection to the balanced line-level output of a mixer This item is currently low on stock. Please let us know if you would like to order this item. |   |
 » Switchable Attenuator - (A15AS) Use the A15AS balanced-line attenuator to prevent low-impedance microphones (rated at 150 or 600 ohms) and high-output condenser microphones from overloading » more » High Pass Filter - (A15HP) The Shure A15HP filter rolls off low audio frequencies to reduce 60 Hz electrical hum, low-frequency wind noise, air conditioner noise, » more » Tone Generator - (A15TG) The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source that can be used to troubleshoot low-impedance, balanced-line microphone » more » Line Matching Transformer (xlrm - Ts) - (A95U) This reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone » more » Line Matching Transformer (xlrf - Ts) - (A95UF) The Shure A95UF is a reversible transformer that matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The » more » Camcorder Interface 0.6m (3.5mm - Xlrf) - (A96F) The Shure A96F transformer connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording » more | |
