CAMCORDER INTERFACE 0.6M (3.5MM - XLRF)
Shure Incorporated
| The Shure A96F transformer connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the DC bias voltage typically found in camcorder microphone inputs. The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device. It features a female XLR connector on the microphone end and .6 meter (2 ft) cable with 3.5 mm phono plug on the recorder end. This item is currently low on stock. Please let us know if you would like to order this item. | Stock Code
A96F
Pack/Qty
EA
Retail Price (Incl GST)
$ 129.00
Warranty
2
  |
 » Switchable Attenuator - (A15AS) Use the A15AS balanced-line attenuator to prevent low-impedance microphones (rated at 150 or 600 ohms) and high-output condenser microphones from overloading » more » High Pass Filter - (A15HP) The Shure A15HP filter rolls off low audio frequencies to reduce 60 Hz electrical hum, low-frequency wind noise, air conditioner noise, » more » Tone Generator - (A15TG) The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source that can be used to troubleshoot low-impedance, balanced-line microphone » more » Line Matching Transformer - (A85F) The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced » more » Line Matching Transformer (xlrm - Ts) - (A95U) This reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone » more » Line Matching Transformer (xlrf - Ts) - (A95UF) The Shure A95UF is a reversible transformer that matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The » more | |
