CONTRACTOR AMP 8 X 100W/CH @ 70V
QSC Audio Products, Inc.
| Designed for permanently installed sound systems where rackspace is at a premium, QSCs CX108V and CX168 provide unprecedented levels of channel density for multi-channel amplifiers. The CX108V and CX168 provide 100 watts/ch. @ 70 volts and 90 watts/ch. @ 8 ohms respectively. With both models, each pair of channels may be bridged to configure these amplifiers as 4-, 5-, 6-, or 7-channel units. Like the entire CX Series, the 8-channel models feature DataPorts for remote amplifier management or signal processing, incorporate QSCs legendary PowerWave technology, and deliver our unmatched reputation for quality and reliability. QSCs PowerWave technology takes your audio to an entirely new level. Delivering tighter bass and clean, transparent highs, PowerWave also cuts waste heat, boosts reliability, and eliminates unwanted noise and hum. PowerWave is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails over 200,000 times per second through an ultra-low noise impedance circuit. Unlike amplifiers that use conventional supplies, the audio signal is never starved prematurely and remains crisp and clean. FEATURES - 100 watts per channel at 70 volts (CX108V) - 90 watts per channel at 8 ohms and 130 watts per channel at 4 ohms (CX168) - Compact size - only two rack spaces and 14 inch deep for reduced rack space - Channel pairs bridgeable for maximum flexibility - Exclusive PowerWave switch-mode power supply technology for high performance and compact size - Active Inrush Limiting eliminates AC inrush current, removing the need for expensive power sequencers - Four HD15 DataPorts (one per channel pair) for QSControl computer control or QSCs signal processing accessories - Custom integrated gain control security cover for tamper-proof installations - 1-dB recessed detented gain controls for fast and accurate settings - Detachable Euro-style input and output connectors - DIP switch control for clip limiters, high-pass filters, bridge-mono and parallel operation - Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (50 Hz or 75 Hz; CX108V) (33 Hz or 70 Hz; CX168) - Comprehensive front panel indicators including signal, clip, bridge-mono and parallel-input LEDs - Fully protected - including DC, infrasonic and ultrasonic, thermal overload and short circuit protection - High-performance Class AB+B complementary bipolar output circuitry - Light weight - only 21 pounds (9.5 kg) for easier racking and shipping - 3-year warranty plus optional 3-year extended service contract (CX168 Pictured) This product is sold through specialist dealers only, please phone 09 913 6212 or email info@nowsound.co.nz. | Stock Code
CX108V
Pack/Qty
EA
Warranty
3
  |
 » Digital Signal Processing Module - (DSP-3) After three decades of developing pioneering audio products and systems, QSC raises the bar once again, setting a new standard in signal processing with the » more » Digital Signal Processing Module - (DSP-4) With more than three decades of experience pioneering cutting edge audio products, QSC raises the bar once again with the DSP-4 Digital Signal Processing Module. » more » Crossover For Cx/dca/pl2/isa - (XC-3) The XC-3 is an active two-way crossover for use with bi-amplified loudspeakers. The unit mounts to the rear panel of a two-channel DCA, CX, or » more » Stereo Precision Attenuator For Cx/dca/p - (SPA-3) The SPA-3 is an externally mounted two-channel precision attenuator accessory for DataPort-equipped QSC amplifiers. With pushbutton programming and digital gain control, it offers precise, secure, » more | |
 » Contractor Amp 1100w/ch @ 4 Ohms - (CX1102) The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the » more » Contractor Amp 1000w/ch @ 70v - (CX1202V) The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the » more » Contractor Amp 8x 130w/ch @ 4 Ohms - (CX168) Designed for permanently installed sound systems where rackspace is at a premium, QSCs CX108V and CX168 provide unprecedented levels of channel » more » Contractor Amp 4 X 220w/ch @ 70v - (CX204V) The new 4-channel CX amplifiers give you four channels in only two rack spaces-without compromising on power. Choose from three models-a » more » Contractor Amp 4 X 250w/ch @ 4 Ohms - (CX254) The new 4-channel CX amplifiers give you four channels in only two rack spaces-without compromising on power. Choose from three models-a » more » Contractor Amp 325w/ch @ 4ohms - (CX302) The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the » more » Contractor Amp 250w/ch @ 70v - (CX302V) The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three » more » Contractor Amp 4 X 400w/ch @ 4 Ohms - (CX404) The new 4-channel CX amplifiers give you four channels in only two rack spaces-without compromising on power. Choose from three models-a » more » Contractor Amp 500w/ch @ 4 Ohms - (CX502) The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three » more » Contractor Amp 440w/ch @ 70v - (CX602V) The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three » more » Contractor Amp 700w/ch @ 4 Ohms - (CX702) The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three » more » Contractor Amp 900w/ch @ 4 Ohms - (CX902) The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three » more | |
